9 Obour buildings - Salah Salem
01011929006 egymst@egymst.com
Close
9 Obour buildings - Salah Salem 01011929006
+20 24031849 egymst@egymst.com
Hours: Sun - Thu 9:00 AM - 5:00 PM

Cygnus 4+ General Purpose

Cygnus Instruments Ltd

The Cygnus 4+ General Purpose thickness gauge is a light, tough multi-mode thickness gauge. It features a sunlight readable display with Live A-scan, intuitive menu and sequential data logging for easy reporting and analysis. Used with Cygnus High Temperature Probe, the Cygnus 4+ can measure remaining wall thickness of high-temperature, in-service assets without shutdown or isolation. The C4+ UTG is ideal for plant maintenance, civil engineering, ship inspections, oil and gas facilities as well as high-temperature, in-service thickness surveys across refining, oil and gas, energy and process sectors

Contact Us

Description

Key Features:

  • Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies

  • Echo-Echo and Single-Echo modes for heavily corroded metals with a thin or no coating

  • Deep Coat function ignores coatings up to 20mm thick

  • Live A-Scans aid visual measurement verification

  • Data Logging with A-scan and Auto-Log feature

  • Manual and automatic gain control

  • Min/max measurement limit functions with visual and vibrate alert

  • Large front sunlight readable LCD display with Live A-scan

  • Water and dust tight IP67 housing

  • Shock and impact proof to US MIL STD 810G

  • Safe operation in explosive atmospheres: Class 1, Division 2, Group D locations only, as defined in NFPA 70, Article 500

  • One and two point calibration

  • Can be upgraded to 6+ at an additional cost.

    Measuring Modes

    Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick
    Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick
    Single-Echo using 1 echo

    Materials

    Velocities from 1,000 – 9,000 m/s (0.0390 – 0.3543 in/us)

    Accuracy

    ±0.05 mm (±0.002 inch) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on
    ±0.1 mm (±0.004 inch) or 0.1% of thickness measurement whichever is the greatest – in Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the same material as calibrated on

    Resolution

    Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch)
    Single-Echo and Echo-Echo modes – 0.1 mm (0.005 inch) or 0.01 mm (0.001 inch)

    Probe Options

    Single crystal probes, Twin crystal probes and High temperature probe

    Measurement Range in Steel

    0.8 – 250 mm (0.031 – 10 inch) depending on selected probe and configuration, material and temperature

    Connector

    2 x Lemo 00

    Power

    3 x AA / R6 batteries

    Battery Life

    Approx. 10 hours continuous measurement

    Electronics

    Dual channel pulser

    Display

    2.4 inch QVGA LCD: 47 x 37 mm

    Size

    84 x 130 x 35 mm (3.3 x 5.1 x 1.4 inch)

    Weight

    300 g (10.5 oz) (inc. batteries)

    Operating Temp.

    -10°C to 50°C (14°F to 122°F)

    Data Logging

    5,000 measurements and A-scans per record. Max number records: 100 (soft limit)

    Computer Software

    CygLink allows remote logging and viewing of A-scan graphs
    Survey and report generation to PDF file
    Graphic analysis of data and statistical calculations

    Environmental Rating

    IP67
    Safe operation in Explosive Atmospheres: Class I, Division 2, Group D Locations only, as defined in the National Fire Protection Association Code (NFPA 70), Article 500. Tested using MIL-STD-810G, Method 511.5, Procedure I
    MIL STD 810G Method 501.6 (high temp +55°C (131°F))
    MIL STD 810G Method 502.6 (low temp -20°C (-4°F))
    MIL STD 810G Method 507.6 (humidity 95%)
    MIL STD 810G Method 512.6 (immersion 1 metre for 30 mins)

    Shock and Impact

    MIL STD 810G Method 514.7 (vibration)
    MIL STD 810G Method 516.7 (shock 20g)
    MIL STD 810G Method 516.7 (transit drop 1.22 m)

    Standards

    Designed for BS EN ISO 16831

    Compliance

    CE, UKCA, RoHS

    Warranty

    3 years on gauge and 6 months on probe

Address: 9 Obour buildings - Salah Salem

Mobile: 01011929006

Email: egymst@egymst.com

Phone: +20 24031849

Fax: +20 24016837

Sun - Thu 9:00 AM - 5:00 PM