Cygnus 6+ PRO
The Cygnus 6+ PRO thickness gauge boasts a full range of useful features for professional users, including A-scan, B-scan and comprehensive data logging. Used with Cygnus High Temperature probe, the Cygnus 6+ PRO can measure remaining wall thickness of high-temperature, in-service assets without shutdown or isolation. Ideal for use in high temperature, process plants, ship surveys, plant maintenance, civil engineering, ship inspections, oil and gas facilities.
Description
Key Features:
Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
Echo-Echo and Single-Echo modes for heavily corroded metals with a thin or no coating
Live A-Scans aid visual measurement verification
Live B-scans enable cross-sectional measurement to identify changes in thickness quickly
Advanced Data Logging (Linear, 2D/3D, Templates) with A-scan and Auto-Log feature
Radial Points allow further investigation AROUND a measurement spot/area of interest, e.g. heavy corrosion
Temperature Compensation feature for measurement on hot materials
Deep Coat function ignores coatings up to 20mm thick
Manual and automatic gain control
Min/max measurement limit functions with visual and vibrate alert
Uses single and twin crystal probes
Freeze function
One and two point calibration
Bluetooth for data transfer
Large front LCD display and end-mounted rotatable LCD display with grayscale setting for bright sunlight
Safe operation in explosive atmospheres: Class 1, Division 2, Group D locations only, as defined in NFPA 70, Article 500
Water and dust tight IP67 housing
Shock and impact proof to US MIL STD 810G.
Measuring Modes
Multiple-Echo using 3 echoes to ignore coatings up to 20 mm (0.8 inch) thick.
Echo-Echo using 2 echoes to ignore coatings up to 1 mm (0.04 inch) thick.
Single-Echo using 1 echoMaterials
Velocities from 1,000 – 9,000 m/s (0.0390 – 0.3543 in/us)
Accuracy
±0.05 mm (±0.002 inch) – in Multiple-Echo measurement mode, when calibrated and measuring the same material as calibrated on
±0.1 mm (±0.004 inch) or 0.1% of thickness measurement whichever is the greatest – in Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the same material as calibrated onResolution
Multiple-Echo mode – 0.1 mm (0.005 inch) or 0.05 mm (0.002 inch)
Single-Echo and Echo-Echo modes – 0.1 mm (0.005 inch) or 0.01 mm (0.001 inch)Probe options
Single crystal probes, Twin crystal probes and High temperature probe
Measurement Range in Steel
0.8 – 250 mm (0.031 – 10 inch) depending on selected probe and configuration, material and temperature
Connector
2 x Lemo 00
Power
3 x AA / R6 batteries
Battery Life
Approx. 10 hours continuous measurement
Electronics
Dual channel pulser
Display
Front LCD 2.4 inch QVGA: 47 x 37 mm
End-mounted LCD: 25.58 x 6.38 mmSize
84 x 130 x 35 mm (3.3 x 5.1 x 1.4 inch)
Weight
300 g (10.5 oz) (inc. Batteries)
Operating Temp.
-10°C to 50°C (14°F to 122°F)
Data Logging
5,000 measurements and A-scans per record
Max number records: 100 (soft limit)Computer Software
CygLink allows remote logging and viewing of A-scan graphs
Survey and report generation to PDF file
Graphic analysis of data and statistical calculationsEnvironmental Rating
IP67
Safe operation in Explosive Atmospheres: Class I, Division 2, Group D Locations only, as defined in the National Fire Protection Association Code (NFPA 70), Article 500. Tested using MIL-STD-810G, Method 511.5, Procedure I
MIL STD 810G Method 501.6 (high temp +55°C (131°F))
MIL STD 810G Method 502.6 (low temp -20°C (-4°F))
MIL STD 810G Method 507.6 (humidity 95%)
MIL STD 810G Method 512.6 (immersion 1 metre for 30 mins)Shock and Impact
MIL STD 810G Method 514.7 (vibration)
MIL STD 810G Method 516.7 (shock 20g)
MIL STD 810G Method 516.7 (transit drop 1.22 m)Standards
Designed for BS EN ISO 16831
Compliance
CE, UKCA, RoHS
Warranty
3 years on gauge and 6 months on probe