QSR® Axial
QSR® Axial extends guided wave scanning to locations where the area of interest cannot be assessed using circumferential wave propagation, such as corrosion beneath clamped supports or at embedded wall penetration interface. Instead of sending waves around the pipe, the scanner runs alongside the feature, using axial propagation to assess the pipe wall ahead of the sensor. Sensor positioning ensures the area beneath the obstruction is included within the inspection area. Using the same QSR® ePOD electronics, a dedicated low‑profile Axial Sensor — incorporating both transmitter and receiver sections — and a Traction Unit, enable quantitative wall thickness measurement in areas otherwise inaccessible to inspection.
Description
Specifications
Nominal Pipe Size
(Manual Scan)
4″ to 48″ (DN 100 to 1200)
Nominal Pipe Size
(Motorized Scan)
6″ to 16″ (DN 150 to 400)
Pipe Thickness
6 mm to 13 mm (0.236″ to 0.512″)
Operating Temperature
-20°C to 70°C (-40°F to 160°F)
Clearance (Sensor)
Less than 28 mm (1.1″)
Clearance (Traction Unit)
Less than 85 mm (3.4″)
Surface Preparation
Surface must be wiped clean of loose debris.
Coatings thicker than 1 mm must be removed under the sensor path.