9 Obour buildings - Salah Salem
01011929006 egymst@egymst.com
Close
9 Obour buildings - Salah Salem 01011929006
+20 24031849 egymst@egymst.com
Hours: Sun - Thu 9:00 AM - 5:00 PM

QSR1

Guided-Ultrasonics

QSR1® introduced the Quantitative Short Range technique to the field of Non‑Destructive Testing (NDT). As the first guided wave scanning instrument, it made possible to measure wall thickness in areas where direct access is not available. Developed around the challenge of quantifying Corrosion Under Pipe Supports (CUPS), QSR1® established a practical means to quantitatively assess the pipe‑to‑support contact area without access to the underside of the pipe, which is required by other methods. The same approach is now applied across the QSR® System, extending beyond pipe supports to a wider range of features.

Contact Us

Description

Specifications

Pipe Diameter

6″ to 24″ (DN 150 to 600) – Nominal API 5L

Pipe Wall Thickness

6 mm to 13 mm (0.236″ to 0.512″)

Operating Temperature

‐20°C to 70°C (‐40°F to 160°F)

Communications

USB, LAN

Clearance

Varies according to diameter:
from 210 mm to 170 mm [8.3″ to 6.7″]
Special frames available for limited clearance.

Pipe Orientation

Horizontal (±15 degrees)

Surface Preparation

Surface must be wiped clean of loose debris.
Coatings thicker than 1 mm must be removed under the sensor.

Address: 9 Obour buildings - Salah Salem

Mobile: 01011929006

Email: egymst@egymst.com

Phone: +20 24031849

Fax: +20 24016837

Sun - Thu 9:00 AM - 5:00 PM